System Requirements; Technical Specifications - Zte MF636 User Manual

FCC has granted an Equipment Authorization for this model phone with all reported SAR
levels evaluated as in compliance with the FCC RF exposure guidelines. Additional
information on Specific Absorption Rates (SAR) can be found on the Cellular
Telecommunications & Internet Association (CTIA) web site: http://www.phonefacts.net or
the Canadian Wireless Telecommunications Association (CWTA) web site:
http://www.cwta.ca.
In the United States and Canada, the SAR limit for mobile phones used by the public is
1.6watts/kg (w/kg) average over one gram of tissue. The standard incorporates a substantial
margin of safety to give additional protection for the public and to account for any variations
in measurements.

1.4 System Requirements

The USB Modem supports any PC or MAC system using the USB 2.0 interface and
operating systems listed below:
Operating System: Windows 2000 / XP / Vista, and MAC OS X 10.4 and above
Recommended Configuration:
CPU PowerPC or Intel (500MHz or above)
Hard Disk 20MB or above available
RAM 128M or above
The performance of the modem may be reduced if the configuration is below the
recommended requirement.

1.5 Technical Specifications

Networks
Frequency
Bands
Dimensions
Weight
Data Rate
Working
Voltage
Current
Consumption
Maximum
Emitted Power
Interface Type
Supported
Systems
Functions
HSPA/GSM/GPRS/EDGE
HSPA 850/1900/2100 MHz
GSM/GPRS/EDGE 850/900/1800/1900 MHz
69mm x 26.5mm x 12mm
Approx. 40g
HSUPA Mode up to 2Mbps
HSDPA Mode up to 7.2Mbps
EDGE Mode up to 236.8Kbps
GPRS Mode up to 57.6Kbps
5V
Resting 100mA rms
Max: 450mA rms
3G Mode: 250mW
2G Mode: 2W
USB Standard (2.0)
Compatible with PC and MacOS as listed
Text message service, data service, internet, applied management,
supports MicroSD
4