Zte MF631 Quick Manual

Introduction
The ZTE USB modem is a multi-mode USB modem, working in HSUPA/HSDPA/WCDMA/EDGE/
GPRS/GSM networks. With USB interface connecting to a laptop or a desktop PC, it integrates
the functionality of a modem and a mobile phone (SMS), and combines mobile communication
with Internet perfectly. It supports data and SMS services through the mobile phone network,
enabling you to communicate anytime and anywhere.
Specification

USB Modem

The following table shows the specification of your device.
Interface Type
Quick Guide
Systems supported
Operating systems supported
MF631
Functions
Network Standards HSUPA/HSDPA/WCDMA/EDGE/GPRS/GSM
Transmission speed (Max) HSUPA: 5.76Mbps UL
Temperature Storage: -40°C ~ +80°C
Dimension 76mm×24.5mm×10mm
Weight About 25g
microSD capability Support up to 32GB microSD card
Notes: microSD is a trademark of SD Card Association.
USB 2.0 high speed
Getting to know your device
Supports most types of laptop and desktop PC.
The following figure shows the appear-
Windows XP, Vista, Windows 7 MAC 10.4 or above
ance of the MF631. It is only for your
SMS service, Data service, Applications management,
reference. The actual product may be
different.
support microSD card, etc.
Hardware Installation
1. Put finger on the bottom finger grip, and then lift the cover of the
HSDPA: 7.2Mbps DL
modem to release and remove.
Operation:-10°C ~ +55°C
Notes:
Do not open the cover rudely so as to avoid the damage of the cover.
2. Insert the SIM/USIM card into the SIM/USIM card slot.
Insert the SIM/USIM card with the metal contact area facing down-
wards into the slot, shown as the following picture.
1. Indicator
3. Insert the microSD card into the microSD card slot.
2. Front Cover
Insert your microSD card into the microSD card slot, shown as the
3. USB Connector
following picture.
4. microSD card slot
Notes:This modem only supports microSD card.
5. SIM/USIM card slot
4. Put the cover of the modem flatly upon the body of modem. Direct
the cover towards the locking catches on the sides of the modem
and push the cover of the modem to lock the cover into its place.
5. Connect the Modem to your laptop or desktop PC.
! Rotate the USB connector and plug the USB connector into your
computer's USB port. Make sure that it is tightly inserted.
! The OS automatically detects and recognizes new hardware and
starts the installation wizard.