Siemens gigaset SE551 User Manual page 27

Gigaset SE551 WLAN dsl/cable / multilanguage / A31008-M1029-R101-2-Z143 / qig_Gigaset551.fm / 03.07.2006
To the mains power supply
Please remember:
Only use the router with the mains adapter (12V 1A DC) that is supplied.
ì
Connect the mains adapter cable to the 12V DC socket on the Gigaset SE551 WLAN
dsl/cable.
ì
Plug the mains adapter into a mains socket.
Your Gigaset SE551 WLAN dsl/cable is now ready for use.
u
The power LED on the front lights up.
u
The WLAN LED lights up to indicate that the Gigaset SE551 WLAN dsl/cable is ready
to open wireless connections.
The radio link to a PC that is connected by means of a wireless network adapter is
opened automatically provided the network adapter has been configured with the
same SSID as the Gigaset SE551 WLAN dsl/cable (see page 21). It can take a few sec-
onds for the wireless connection to be established. The WLAN LED flashes when
data is sent or received via this connection.
u
The LAN LEDs light up if a device is connected to the corresponding LAN connection
by means of an Ethernet cable.
In order to communicate via the Gigaset SE551 WLAN dsl/cable, you must carry out the
network configuration on the connected PC (see page 24).
To access the Internet via the Gigaset SE551 WLAN dsl/cable you must configure your
Internet connection (see page 26).
You will find information on how to operate devices on the USB port of the Gigaset
SE551 WLAN dsl/cable (printer or external data carrier) in the full user guide on the sup-
plied CD.
Quick Start Guide
23