Kogan KALED43UHDZA User Manual page 28

1. Select the desired channel then press the "•" button on the remote control
to start recording the current broadcast, a progress bar will be displayed
at the bottom of the screen.
2. Recording stops when you press the EXIT button and the recorded file is
stored in the external USB device automatically.
NOTE: You can only watch channels on the same frequency as the program
being recorded. If you try to change to another channel or come to the main
interface a message will appear prompting you to continue or not "STOP
RECORDING. System will stop record if user want to channel up/down, Confirm
or Cancel."
This unit is able to record while in standby mode.
Note: Start a recording then press the power button. A message will be
displayed prompting you to standby, stop or cancel.
In DTV mode, press "GUIDE" button to enter the
Electronic Program Guide.
At Guide menu, press "RED" button to "Record"
Setting.
In the Guide menu, press "OK" button to enter
"Reminder Settings".
◀ ▶
Note: Press / button to adjust the scheduled
time, press OK button to save the setting.
You can capture the current picture by pressing
the yellow button for over 1 second, at which
point a picture preview will pop up on-screen if
the capture is successful. Please see the picture at
27