Equalizer - Kogan KALED43UHDZA User Manual

▲ ▼
1. Press / key to select an equalizer item.
2. Press OK key to enter the equalizer submenu. The sound settings can be
adjusted to suit your user preferences.
▲ ▼
1. Press / key to select a particular item.
◀ ▶
2. Press / key to decrease or increase the value of a particular item.
Note: The adjusted values are stored according to the selected particular item.
If the volumes of the left speaker and the right speaker are not the same, you
can adjust the "Balance" to suit your personal preference.
▲ ▼
1. Press / key to select "Balance" option.
◀ ▶
2. Press / key to decrease or increase the value of the item.
Each station will have its own signal conditions which include varying volume
levels. As it is inconvenient to adjust the volume every time the channel is
changed, "Auto Volume" automatically adjusts the volume of the desired channel
by lowering the sound output when the modulation signal is high, or by raising
the sound output when the modulation signal is low.
▲ ▼
1. Press / key to select "Auto Volume" option.
◀ ▶
2. Press / key to select "On" or "Off".
This is used to turn on surround sound to gain better sound effect.
▲ ▼
1. Press / key to select "Surround sound" option.
◀ ▶
2. Press / key to select "On" or "Off".
This is used to select "SPDIF Mode" .This option is only used in HDMI\DTV
mode.
▲ ▼
1. Press / key to select "SPDIF Mode" option.
◀ ▶
2. Press / key to select "RAW" or "PCM".
This option is only used in HDMI mode.
▲ ▼
1. Press / key to select "HDMI Sound" option.
◀ ▶
2. Press / key to select HDMI Sound mode, HDMI or VGA.
19