Program - Kogan KALED43UHDZA User Manual

▲ ▼
Press / key to select "Auto Search" option. You can
select the country in the list view, the set the search
type. The number of searched channels will be shown
on the screen. If you set "Tune Type" to "DTV+ATV",
once searching for DTV channels is over, the TV will
start to search for analog channels. (Note: Australia does not have analog
television stations anymore).
NOTE: If you want to exit the search, you can press the EXIT button.
This function is to search manually for analogue television signals. It will not
successfully tune into any stations in Australia.
In the ATV/DTV source, you can choose "DTV Manual
Search" to enter "DTV Manual Search" menu. If your
Antenna Type is DVB-C, you can use / buttons to choose
the frequency. If the Antenna Type is DVB-T, you can use
◀ ▶
/ buttons to choose the channel, then press OK button
to search, and then the TV will store the DTV channel if
there is a DTV signal present.
▲ ▼
You can use / button to choose "Program Edit" and
enter the menu, press the Blue/Red/Yellow colour button
on the remote control to skip, delete and move programs,
also you can press FAV button to add to your favourite list.
Delete: You can press RED button to enter "DEL"
•
menu, then choose the channel you want to delete
and press RED button again to delete.
FAV: If you like a channel, you can choose "FAV"
•
button in the menu to add it to your favourite list.
Then you can press "FAV" button on the remote
control to choose your favourite channel instantly.
▲ ▼
1. Press / key to select "Signal Information" option.
2. Press "Ok"or
channel.
NOTE: Signal Quality/Signal Strength (DTV Only): Unlike
analogue channels, which can vary in reception quality,
digital channels must have perfect reception quality or you
▶
key so you can see the signal information of the DTV
◀ ▶
22