Table of Contents

Advertisement

▲ ▼
1. Press / key to select "Sleep Timer" option.
◀ ▶
2. Press / key repeatedly until the desired time appears (Off, 10min, 20min,
30min, 60min, 90min, 120min, 180min, 240min).
Notes:
The sleep timer you have set will be cancelled when the TV turns off or if a
power failure occurs.
When the time is less than 60 seconds, remind information will be
displayed on the screen. Press any key button to cancel timer function.
1. Press OK button or
"Wired" option.
2. Press to select the wired mode, then press OK on the "Set" preference.
1. Press OK button or
◀ ▶
2. Press / to turn the wi-fi controller on/off.
3. Press OK button on "SSID", then it will show you the active wi-fi list.
4. Press OK to connect to one of them.
1. Press OK button or
2. PPPOE is point-to-point protocol over ethernet. For connection
operations, please contact your Internet Service Provider.
WARNING:
Before connecting your USB device to the TV, please back up your files to
prevent them from damage or loss of data.
A USB disk must be formatted when first used for PVR. Any existing data
on the disk will be lost during the formatting process. Please back up your
disk if you do not want to lose this data. You are recommended to use a
dedicated disk for PVR use only. Do not disconnect disk or power during
formatting.
Do not modify PVR files on a PC.
Note: Make sure your USB device is compatible with the TV and able to support
to enter the submenu, then press / to select the
to enter the submenu.
to enter the submenu.
25
▲ ▼

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents