Niles SW10WM Installation Manual page 28

12. Insert the frame into the cut-out hole securing
the frame with the supplied 2" screws where
needed to ensure a snug fit against the wall.
13. Insert the metal grille into the frame pressing
firmly all the way around the perimeter.
TIP. If the grille does not stay flush in some areas,
remove grille, bending flange slightly outward
in those areas, then re-apply grille to frame.
OPTIONAL: The grille can be painted to match most
decors but should be painted before installation.
Additionally, paint the grille separately from the
loudspeaker frame. For best results when painting the
grille, use a spray gun or airless sprayer. Thin the paint
to prevent clogging of the grille holes and apply several
light coats instead of one heavy one.
26