Niles SW10WM Installation Manual page 19

SW10JM INSTALLATION – CEILING APPLICATION
4. Attach the supplied front and rear brackets to
the 2 x 4's using the supplied 1.5" screws.
NOTE: REMOVE THE STOP BLOCK FROM THE SW10JM
PORT THE STOP BLOCK IS INCLUDED TO PREVENT
THE SUBWOOFER FROM DISENGAGING FROM
BRACKETS UNTIL THE GRILLE IS INSTALLED.
5. Place the SW10JM subwoofer into the brackets
aligning the attachment pins to the slots in the
brackets. Begin with the ported end first.
Front Bracket
6. Install the stop block between the bracket
and cabinet at rear of cabinet as indicated
in drawing.
NILES AUDIO CORPORATION – 1-800-BUY-HIFI or 1-305-238-4373
Subwoofer
Rear Bracket
Screw
Front Bracket
2 x 4
Subwoofer
Stop Block
(CONTINUED)
Screws
Rear Bracket
Subwoofer
Screw
Stop Block
2 x 4
17