Niles SW10WM Installation Manual page 13

SW10JM INSTALLATION – FLOOR APPLICATION
4. Attach the supplied front and rear brackets to the
2 x 4's using the supplied 1.5" screws.
NOTE: REMOVE THE STOP BLOCK FROM THE SW10JM
PORT. THE STOP BLOCK IS INCLUDED TO PREVENT
THE SUBWOOFER FROM DISENGAGING FROM
BRACKETS UNTIL THE GRILLE IS INSTALLED.
5. Place the SW10JM subwoofer into the brackets
aligning the attachment pins to the slots in the
brackets. Begin with the ported end first.
Front Bracket
6. Install the stop block between the bracket
and cabinet at rear of cabinet as indicated
in drawing.
NILES AUDIO CORPORATION – 1-800-BUY-HIFI or 1-305-238-4373
Rear Bracket
Subwoofer
Screw
(CONTINUED)
2 x 4
Front Bracket
Rear Bracket
Subwoofer
Stop Block
2 x 4
Screws
Subwoofer
Stop Block
Screw
11