Maintenance And Service; Declaration Of Conformity - Bosch GBH 2-22 S Operating Instructions Manual

Maintenance
Before any work on the machine itself, pull the mains
plug.
For safe and efficient working, always keep the ma-
chine and the ventilation slots clean.
Clean the tool holder after each use.
Replacing the Dust Cap
Replace the dust protection cap 2 without delay if it is
damaged. A damaged dust protection cap can allow
dust to penetrate into the tool holder and lead to mal-
functions.
Have the replacement of the dust protection cap
performed by a customer service agent.
WARNING
Important instructions for connecting a new 3-
pin plug to the 2-wire cable.
The wires in the cable are coloured according to the
following code:
Strain relief
Live = brown
Neutral = blue
Do not connect the blue or brown wire to the earth ter-
minal of the plug.
Important: If the plug on the cable of this machine
must be replaced, dispose of the old plug to prevent
misuse.
Should the tool fail in spite of careful manufacturing
and testing procedures, have the repairs performed by
an authorized customer service location for Bosch
electro-tools.
For inquiries and spare parts ordering, please include
the 10-digit order number on the nameplate of the
tool.
Service
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham-Uxbridge
Middlesex UB 9 5HJ
✆
Service . . . . . . . . . . . . . . .+44 (0) 18 95/83 87 82
✆
Advice line. . . . . . . . . . . . .+44 (0) 18 95/83 87 91
Fax . . . . . . . . . . . . . . . . . . . .+44 (0) 18 95/83 87 89
1 619 929 563 • (02.12) T

4 MAINTENANCE AND SERVICE

To be fitted
by qualified
professionals only
Ireland
Beaver Distribution Ltd.
Greenhills Road
Tallaght-Dublin 24
✆
Service . . . . . . . . . . . . . . . . + 353 (0)1/414 9400
Fax . . . . . . . . . . . . . . . . . . . . . + 353 (0)1/459 8030
Australia
Robert Bosch Australia L.t.d.
RBAU/SBT2
1555 Centre Road
P.O. Box 66 Clayton
3168 Clayton/Victoria
✆
. . . . . . . . . . . . . . . . . . . . . +61 (0)1/800 804 777
Fax . . . . . . . . . . . . . . . . . . . . +61 (0)1/800 819 520
www.bosch.com.au
E-Mail: CustomerSupportSPT@au.bosch.com
New Zealand
Robert Bosch Limited
14-16 Constellation Drive
Mairangi Bay
Auckland
New Zealand
✆
. . . . . . . . . . . . . . . . . . . . . . . +64 (0)9/47 86 158
Fax . . . . . . . . . . . . . . . . . . . . . . +64 (0)9/47 82 914
Disposal
Tool, accessories and packaging should be sorted for
environment-friendly recycling.
These instructions are printed on recycled paper man-
ufactured without chlorine.
The plastic components are labelled for categorised
recycling.

Declaration of Conformity

We declare under our sole responsibility that this prod-
uct is in conformity with the following standards or
standardization documents:
EN 50 144 according to the provisions of the direc-
tives 89/336/EEC, 98/37/EC.
Dr. Egbert Schneider
Senior Vice President
Engineering
Robert Bosch GmbH, Geschäftsbereich Elektrowerkzeuge
Specification subject to alteration without notice
English–5
Dr. Eckerhard Strötgen
Head of Product
Certification