Network - Panasonic DMR-HCT230 Operating Instructions Manual

HDMI Audio Output
Select "Off" when connected to an
amplifier/receiver with a DIGITAL AUDIO
OUT terminal.
Contents Type Flag
If "Automatic" is selected, the optimal method
of playback depending on the TV (e.g.
cinema) will automatically be selected (only
when the TV supports Contents Type Flag).
VIERA Link
Select "Off" when you do not want to use
"HDAVI Control".
Common Interface
Access to software contained on CI module.
( 12)
• Select "Slot 1:" or "Slot 2:" and press [OK].
Follow the on-screen instructions.
• This setting cannot be made when "TV
System" is set to "NTSC" (
• On-screen instructions may not correspond to the remote
control buttons.
• For more information about TV service, please contact
your service provider.
• Depending on the card, in some cases its use together
with this unit may be limited or not possible.
Easy Network Setting
Press [OK] to start Easy Network Setting. (
Network Settings
80).

Network

LAN Connection Mode
Select the LAN connection method.
Wireless Settings
This allows to set and check the connection
settings of the Wireless router.
e.g.,
Wireless Settings
Connection Setting
Double Speed Mode Setting ( 2.4GHz )
The current connection settings and status are
displayed.
Current connection settings
Network name
( SSID )
Wireless type
Authentication type
Encryption type
Current status
Connection status
Reception
 
1 Encryption type
2 Reception
3 Type of wireless router
Connection Setting
The Wireless router connection wizard will
be displayed.
Double Speed Mode Setting ( 2.4GHz )
When a 2.4 GHz wireless format is used,
this setting sets the connection speed.
• If you connect using the "Double Speed
Mode (40MHz)", 2 channels use the
same frequency band, and there is
consequently a greater risk of reception
interference. This can cause the
connection speed to drop or the
connection to become unstable.
Convenient functions
21)
802.11n (2.4GHz/20MHz)
AES
Connected

81
VQT5C33