Connecting To The Network - Panasonic DP-UB9000EGK Operating Instructions Manual

Connecting to the network

The following services can be used when this unit is connected to broadband.
≥ Firmware can be updated (
≥ You can enjoy BD-Live/Network Service (
≥ You can access other devices (Home Network) (
≥ This unit supports Direct Access and can make a wireless connection to wireless devices without
router. You can use this function when enjoying Home Network feature, etc. Internet access is not
available while connected via Direct Access. (
For details about connection method, refer to the instructions supplied with the connected equipment.
Wireless LAN connection
This unit has built-in wireless LAN and can be connected to a wireless router.
Internet
≥ The unit is not compatible with public wireless LAN services.
≥ Ensure that the wireless LAN antenna is not in contact with the HDMI cable and other cords.
Otherwise, the radio signal range may be reduced.
≥ When using an USB-HDD, place it as far away from the wireless LAN antenna as possible.
Otherwise, it may cause slower communication speeds or communication instability because of radio
signal interference.
≥ See page 3 for the precautions of wireless LAN connection.
LAN cable connection
≥ Use category 5e or above straight LAN cables (STP) when connecting to peripheral devices.
≥ Inserting any cable other than a LAN cable in the LAN port can damage the unit.
Getting started
19)
22, 25)
24)
Wireless router, etc.
Broadband router, etc.
LAN cable
- 17 -
23)
Wireless LAN antenna
Internet