Panasonic DMR-HCT230 Operating Instructions Manual page 11

Main unit
Pull to flip down the front
panel.
1 Standby/on switch (Í/I)
Press to switch the unit from on to standby
mode or vice versa. In standby mode, the unit
is still consuming a small amount of power.
2 Channel select ( 24)
 
3 USB port
4 SD card slot
• When removing the SD card, press on the
centre of the card and pull it straight out.
5 Remote control signal sensor
• Angle: Approx. 20° up and down, 30° left and
right
• Distance: Within approx. 7 m in front of the
unit
• While writing to/reading from the media, do not switch the
unit to standby mode or remove the media. Such action
may result in loss of the media contents.
• When inserting the media, ensure that it is facing the right
way up.


Display

SD card
USB memory
Display
1 2 3
USB
COPY
HDD
SD
7
1 Drive (HDD or SD) indicator
2 Copying indicator
3 USB port indicator
4 SD card slot indicator
5 Remote control signal indicator
6 Timer recording indicator
• This indicator lights up when the timer
recording standby is activated.
7 Main display section indicator
- Current time
- Playback counter
- Various messages (
8 Playback indicator
9 Recording indicator
• The indicator will light up while recording.
• The indicator will blink while recording is
paused and before recording starts.
Getting started
4 5 6
SD
PLAY
8 9
96)
11
VQT5C33