3D Video Playback - Panasonic DMR-HCT230 Operating Instructions Manual

Changing audio
Press [AUDIO].
• It will switch depending on the contents
recorded every time it is pressed.
Switching subtitles
[HDD] [USB_HDD] (For recorded titles,
1 Press [STTL ].
2 Press [OK].
3 Select "On" or "Off", then press [OK].
• If you want to switch the subtitle language,
select it in the Basic Operation menu (
Xvid and MKV:
Display with "Subtitle Settings" in the Basic
Operation menu ( 71).
• Xvid and MKV: If the subtitles text are not displayed
correctly, try changing the language settings (
Text).
Displaying the Teletext
[HDD] [USB_HDD] (For recorded titles,
Press [TEXT ].
• Teletext display mode is TOP (FLOF) only.
• Some functions may not work.
• Teletext cannot be displayed when the subtitles are set to
ON.
Aspect
You can switch the screen mode.
Refer to "Switching the aspect ratio of the
screen". ( 88)

3D video playback

Preparation
Connect 3D compatible TV to this unit. (
• Perform the necessary preparations for the TV.
Play back following the instructions displayed
on the screen.
8):
Preparatory 3D settings
Perform the following settings as necessary.
3D Type
If 3D video cannot be played back in 3D, you may
be able to play it in 3D by changing the setting.
71).
( 73, 80)
3D AVCHD Output
If 2D AVCHD video is recognised as 3D video and
cannot be played back correctly, you may be able
to play it by changing the setting. (
3D Playback Message
78, Subtitle
Hide the 3D viewing warning screen. (
8)
Playing back video
14)
73, 80)
73, 80)
43
VQT5C33