Fip4.3 Low Paper In Tray/Tray 3, 4 - Oki B6500 Troubleshooting Manual

FIP4.3 Low Paper in Tray/Tray 3, 4

Step
Possible causes:
HVPS/MCU (PL12.1.19)
LVPS (PL12.1.5)
SENSOR LOW PAPER (PL20.1.30)
ACTUATOR LOW PAPER (PL20.1.31)
PLATE ASSY BTM (PL20.3.10)
Option 550 Paper Feeder 550 PAPER CASSETTE
(PL20.3.50)
Checking the sensor for operation
Does Error still occur, after 550 PAPER CASSETTE
1
filled with a specified amount of paper is inserted into
Tray 3 or Tray 4?
Checking ACTUATOR LOW PAPER for function
Remove 550 PAPER CASSETTE.
Does ACTUATOR LOW PAPER move smoothly, when
moving ACTUATOR LOW PAPER up and down?
2 Does ACTUATOR LOW PAPER go into the sensor part
of SENSOR LOW PAPER, when the flag is pushed up?
Does ACTUATOR LOW PAPER go out of the sensor
part of SENSOR LOW PAPER, when the flag is
released?
Checking PLATE ASSY BTM for operation
Does PLATE ASSY BTM move ACTUATOR LOW
3
PAPER normally, when PLATE ASSY BTM is pushed or
released?
Check
1 – 100
Chapter 1 Troubleshooting
Yes
Go to step 2. End of work
Replace ACTUA-
Go to step 3.
TOR LOW PAPER.
Go to FIP4.9 Replace PLATE
SENSOR LOW ASSY BTM.
PAPER. (RRP20.21)
No