Folding And Lifting Your Scooter - IMP SmartScoot User Instruction Manual

FOLDING AND LIFTING YOUR SCOOTER

SmartScoot™ was innovatively designed to be lightweight, foldable and easy to transport.
The SmartScoot™ will fit in most cars and all SUV's, trucks and vans. The scooter can be
folded and unfolded quickly without the use of any tools.
FOLD IT
SmartScoot™ offers two folding option positions to accommodate various types of spaces.
• Position 1 allows the SmartScoot™ to fold down to its smallest size by removing
the seat first. This size fits into most car trunks, SUV's, trucks and vans.
• Position 2 allows the SmartScoot™ to remain in one piece. This size fits into most
SUV's, trucks and vans.
Position 1 Directions
WARNING – IN THIS POSITION DO NOT LIFT THE SCOOTER BY THE STEERING COLUMN.
USE TWO HANDS TO LIFT THE SCOOTER BY THE SEAT POST AND THE CENTER BAR.
1. Remove the seat by pulling the top security pin from the seat post and by opening the
seat clamp lever. Lift the seat out of the seat post and replace the top security pin in its
original position.
2. Using our Fold n Lock Technology™, fold down the front
steering column by lifting the front lever, pulling the latch
down through the notch and clamp. With one hand on
the steering column use one finger from your opposite
hand to slide the latch sideways until the steering
column releases.
3. Do NOT attempt to lift the scooter by the steering column
only. Use two hands and lift the scooter by the center
bar. There is an enclosed Velcro strap that may be used
to secure the center bar to the steering column.
4. To remove additional weight, you can also remove the battery from the scooter.
Instructions for removing the battery from the scooter can be found in this Manual in the
Battery and Battery Charging section.
5. Once your scooter is placed in your vehicle, engage the parking brake.
Position 2 Directions
1. Using our Fold n Lock Technology™, fold down the
front steering column by lifting the front lever, pulling
the latch down through the notch and clamp. With one
hand on the steering column use one finger from your
opposite hand to slide the latch sideways until the
steering column releases.
2. Lower the steering column until the handlebars
rest on the seat.
3. Lower the back rest of the seat onto the top of the handlebars,
as pictured.
4. Once your scooter is placed in your vehicle, engage the parking brake.
WARNING – IN THIS POSITION DO NOT LIFT THE SCOOTER BY THE STEERING COLUMN.
USE TWO HANDS TO LIFT THE SCOOTER BY THE SEAT POST AND THE CENTER BAR.
14