Engineering Mode Overview - Classic Console - Vision Fitness t80 Classic Service Manual

2.2 ENGINEERING MODE OVERVIEW - Classic Console

MODE FUNCTION
ENG 0 Display Test
ENG 1 Hardware Test
ENG 2 Auto Calibration
ENG 3 Switch Function
ENG 4 Information
ENG 5 Set Machine
SECOND LEVEL Software Version
ENG 8
※ ※ ※ ※ Press the "START" key to save any changes.
CHAPTER 2: Engineering Mode
Start Key – LCD/LED on
Stop Key – LCD/LED off
Any Other Key - Will show on the display window.
Hold the STOP key for 3 seconds to return to the Engineering Menu.
Motor, Incline Motor, & Heart Rate Test.
If you have a digital MCB, Auto Calibration is not necessary. Press the
START key, the words "NO FUNCTION" will scroll on the screen.
- Use the INCLINE or SPEED UP and DOWN keys to switch Energy Save
Mode (ESM) off or on (shown in the SPEED window).
- Use the START key to select unit (Miles or Kilometers) (shown in the
INCLINE window).
Press the ENTER key to enter the Language setting:
- Use the INCLINE or SPEED UP and DOWN keys to select the languages
(English, German, Dutch, French will scroll on the middle window).
Accumulated Time, Distance, and Aged
Press and hold the START key for 5 seconds to clear all data.
Remarks: Unit of Time is Hour.
Unit of Distance is KM or Mile.
Unit of
Set the Machine Type – Options include TF20, T40, and TF40.
Set the Distance Type – Options are Mile or Kilometer.
Press ENTER to scroll to the other settings.
To Get to ENG 8 - Enter into ENG 3, then press and hold the SPEED
DOWN and INCLINE UP key at the same time for 3-5 seconds.
Press ENTER at P0 - Software version.
Press ENTER at P1 - Select speed up rate (normal or quick).
Press ENTER at P3 - Hold the START key to clear all data.
DESCRIPTION
Aged is Minute. (factory only setting)
6