Blaupunkt SB200BT User Manual page 21

SB200BT
Trouble shooting
To keep the warranty valid, never try to repair the system by yourself. If you
encounter problems when using this unit, check the following points before
requesting service.
No power
• Ensure that the mains cable is connected securely.
• Make sure that the unit is switched on.
The remote control does not function
• Use the remote control near to the unit.
• Point the remote control at the remote control sensor on the unit.
• Replace the batteries in the remote control with new ones.
• Remove any obstacles between the remote control and the unit.
Loud hum or noise is heard
• The plugs and sockets are dirty. Wipe them with a cloth slightly moistened
with an appropriate non-abrasive cleaning solution.
The unit does not respond when pressing any buttons
• The unit may freeze up during use. Switch off and then switch on the unit
again at the mains socket to reset it.
No sound output
• Make sure that the unit is not muted. Press MUTE or VOL + to resume normal
listening.
•Ensure that the audio setting of the input source (e.g. T V, game console, DVD
player, etc.) is set to PCM with digital audio output mode while using
Optical/Coaxial connection.
I can't find the Bluetooth name of this unit on my Bluetooth device for
Bluetooth pairing
• Ensure that the unit is switched on.
• Ensure that the Bluetooth function is activated on your Bluetooth device.
• The unit has a Bluetooth function that can receive a signal within 10 meters.
Keep a distance within 10 meters both devices.
The unit switches off automatically after 60 minutes during playing
• Please increase the volume level on your input source player like DVD player/
TV etc..
19