Blaupunkt SB200BT User Manual page 13

SB200BT
Battery installation for remote control
1. Remove the battery compartment cover.
2. Insert two "AAA" size (R03 or UM-4) dry batteries. Make sure that the
batteries are inserted according to the relative polarity (+/-) symbol inside of
the battery compartment.
3. Close the battery cover.
Precautions Concerning Batteries
• Be sure to insert the batteries with correct positive "+ " and negative "- "
polarities.
• Use batteries of the same type. Never use different types of batteries
together.
• Either rechargeable or non-rechargeable batteries can be used. Refer to the
precautions on their labels.
• If the remote control is not to be used for a long time (more than a month),
remove the batteries to prevent from leaking.
• If the batteries leak, wipe away the leakage inside the battery compartment
with a paper towel and replace the batteries with new ones.
• Do not use any batteries other than those specified. Do not mix new batteries
with old ones.
• Do not heat or disassemble batteries. Never throw them in fire or water.
• Do not carry or store batteries with other metallic objects. Doing so could
cause batteries to short circuit, leak or explode.
• Never recharge a battery unless it is confirmed to be a rechargeable type.
Remote control working range:
The remote control sensor was built up in the front of display. The best
11