Blaupunkt SB200BT User Manual page 16

SB200BT
Note:
1. If there is no sound come out of the soundbase. Make sure the audio setting
of your source player (e.g. DVD player, game player, TV) is set to PCM with
digital output. Please reference your TV or player manual for this operation.
2. The output sound of Coaxial and Optical mode may louder than AUX IN etc
which is normal, because the digital audio signal input and output level is
different on audio source player( like DVD player, TV etc).
2. Soundbase connect with TV set-top box.
In case of output jack of your TV set-top box has, you can follow up below
drawing and select AUX IN/optical/Coaxial connection with soundbase.
(connectors on rear panel of SB200T )
LINE IN R-AUX IN -L COAXIAL
3. Soundbase connect with DVD player or Blue-ray DVD player.
In case of output jack of your DVD player or Blue-ray DVD player has, you can
follow up below drawing and select AUX IN/optical/Coaxial/LINE IN
connection with soundbase.
(connectors on rear panel of SB200T )
LINE IN R-AUX IN -L
COAXIAL
OPTICAL
OPTICAL cable(not included)
COAXIAL cable(not included)
RCA to RCA audio cable
(included)
OPTICAL
OPTICAL cable(not included)
COAXIAL cable(not included)
RCA to RCA audio cable
(included)
14
Set-top Box
DVD Player