Table of Contents
Advertisement
2.COPY FUNCTIONS
3
4
5
If the paper source runs out of paper, an error message is displayed on the LCD screen and copying stops. Load
The receiving tray can hold up to 100 sheets. If the excessive paper error occurs, the lamp blinks and an error
When you use overhead transparencies, remove them one by one every time they are ejected. Otherwise, they
Downloaded from
www.Manualslib.com
Enter the number of copies with the digital keys.
Make the copy settings as required.
P.36 "Copy Settings"
You may not be able to use some combinations of functions.
P.134 "Copying Function Combination Matrix"
Press [START] to start copying.
To stop or resume copying, press [CLEAR/STOP] during copying.
Press [OK] or [CANCEL] according to the message displayed on the LCD screen.
When the copying has finished, press [FUNCTION CLEAR] to clear the set copy functions and return to the main
screen (Copy).
paper. The equipment automatically resumes copying after approx. 3 seconds have passed.
message is displayed on the LCD screen. Remove the paper from the tray and press [START] to resume copying.
could be curled and not be good for projection.
manuals search engine
2 COPY FUNCTIONS
Basic Copy Procedure
33
Advertisement
Table of Contents
