Advertisement
6. Measure your heart rate if desired.
Before using the
handgrip heart
rate monitor, re
move the sheets
of plastic from
the metal con
tacts on the
pulse bar. In ad
dition, make sure
that your hands
Contacts
are clean.
To measure your heart rate, stand on the foot
rails and hold the pulse bar with your palms on the
metal contacts; avoid moving your hands. When
your pulse is detected, a heart symbol in the calo
rie display will flash each time your heart beats,
one or two dashes will appear, and then your heart
rate will be shown. For the most accurate heart
rate reading, continue to hold the contacts for
about 15 seconds.
7. Turn on the fan if desired.
The fan features multiple
speed settings. Press
Fan Decrease
the fan increase or de
crease button to select a
11
J
rl.
fan speed or to turn off
\
1
the fan. Note: If the fan
Fan Increase
is on when the walking
belt is stopped, the fan
will turn off automatically after a few minutes.
8. When you are finished exercising, remove the
key from the console.
Step onto the foot rails, press the Stop button, and
adjust the incline of the treadmill to the lowest
setting. The incline must be at the lowest set
ting or you may damage the treadmill when you
fold it to the storage position. Next, remove the
key from the console and put it in a secure place.
When you are finished using the treadmill, press
the power switch into the off position and unplug
the power cord. IMPORTANT: If you do not do
this, the treadmill's electrical components may
wear prematurely.
19
Advertisement
