Table of Contents
Advertisement
Configuration and Administration
Aastra Voice can be configured and administered via the Configurator of the
Aastra 800. In order to do this you need the following:
•
Configurator Expert authorisation (unless you have already logged in as the
administrator), and
•
the activation key for your version of Aastra Voice.
When updating the firmware, it may be necessary to load the current voice files.
The voice files are located on the Aastra 800 USB flash drive. Aastra retailers and sales
partners can alternatively acquire these files in the password-protected partner area
of the ExtraNet at http://www.aastra.de.
Note
Further information regarding the update of the firmware and the configuration of
Aastra Voice can be found in the online help documentation.
To configure Aastra Voice ...
1.
Select the optional component Aastra Voice in the System: Components menu
in the Configurator and load a voice file.
Note
The file format of the voice file loaded in an Aastra 800 is *.kdp.
2.
Enter the activation key for Aastra Voice in the System: Licences menu in the
Configurator.
3.
Define the basic programme setting in the Aastra Voice: Settings menu or
determine the current programme status.
4.
This is also where you configure the call number for Aastra Voice via which
Aastra 800 users can query their voiceboxes.
5.
Configure one or more voiceboxes for Aastra 800 users in the Aastra Voice: Voice
Boxes menu (but only up to the maximum number of licensed voiceboxes). Please
refer to To administer voiceboxes ... starting on page 17 below.
Configuration and Administration
15
Advertisement
Table of Contents
