Power Supply Selection - LENCO PA-95 User Manual

Diagram 2:
COMPUTER
Flat panel TV
DVD/CD
BLUETOOTH
Press the INPUT SWITCHING Button until the BLUETOOTH
BLUETOOTH function is ON. Turn on the BLUETOOTH in device and start searching for this
BLUETOOTH speaker. You will find device name of LENCO PA-95. Select this to link to the
speaker. The Indicator will stop blinking and light up in BLUE color when you are successfully
linked. After the linking, you can start to play music from your device.
When Bluetooth is paired and connected, you can press the play/pause button to disconnect the
current connection and re-pairing once.

POWER SUPPLY SELECTION

Front Panel:
1. Power Jack: Insert the power cord to this jack and connect to AC 230V 50-60Hz.
2. Power Source Switch: AC INPUT, F.CHARGE/OFF, DC INPUT
3. AC Power Switch: AC ON, OFF, CHG ON
How to Use the Switch:
 AC Power Supply, connect the power cord to AC230V 50-60Hz, switch the Power Source
Switch to AC INPUT, and switch the AC power switch to AC ON. To turn the system off,
switch both to OFF.
 Internal DC Power Supply, now the system is powered by built-in battery (12V, 4.5Ah).
Switch the Power Source Switch to DC INPUT, and switch the AC power switch to AC
OFF. To turn the system off, switch both to OFF.
To charge the system, connect the power cord, switch the Power Source Switch to F.
Charge and switch the AC power switch to CHG ON. To use and charge the system in the
same time, switch the Power Source Switch to AC INPUT, and switch the AC Power
Switch to CHG ON.
 External DC power supply: DC: 12V 50W. Turn OFF the AC POWER Button and unplug
the power cord from the AC outlet. Then turn the POWER SOURCE button to DC INPUT.
Then, connect the positive pole of your external power supply to the RED terminal and
connect the negative pole to the BLACK terminal of DC 12V in speaker back panel as the
below picture. The speaker here is powered by external DC power supply. This operation
is for reserve usage when battery runs out of power.
5
Indicator blinks. The