Speaker Connections - LENCO PA-95 User Manual

FEATURES
1. Portable Sound System with Bluetooth
2. Support different Power Supply modes: AC 230V/ External DC 12V/ DC 12V (battery)
3. Built-in rechargeable lead-acid battery for outdoor use
4. With 1*Guitar Input with Guitar volume control
5. With 2 jacks for wired microphone
6. With auto-detected USB & SD card reader function for MP3 decoding
SPECIFICATIONS
Power Consumption: 60W (Max.)
Driver Unit: 8〞4Ω *2+ 2〞*2
Frequency Response: 60Hz-20KHz
S/N Ratio: ≥75dB
Power supply:
 Rechargeable Lead-acid Battery DC: 12V 4.5AH,
 External DC power supply: DC: 12V,
 AC Power supply: AC230V 50-60Hz

SPEAKER CONNECTIONS

1. Insert your USB disk or SD card to the corresponding ports in the control panel referring to
Diagram 1.
2. Connect your audio equipments (TV/DVD/MP3/Iphone/Ipad....) to the signal AUDIO INPUT
ports (2 RCA) on top panel referring to Diagram 2.
3. Connect the wired microphone to the corresponding MIC. IN port in the speaker control panel,
and connect your electrical guitar to the GUITAR INPUT referring to Diagram 1.
4. Power Source Switch: AC INPUT, F.CHARGE/OFF, DC INPUT
5. AC Power Switch: AC ON, OFF, CHG ON
Note: Please change to AUX IN or USB/SD mode first to make the microphone and electrical
guitar works properly.
Diagram 1:
4