Nikon SB-28 Instruction Manual page 36

TTL Auto Flash
For cameras in Group IV: F60-Series/N60, F50-Series/N50 and F-401x/N5005
2
Check the shooting distance according to the lens in use and the
exposure mode selected on the camera.
With Nikkor lenses with a built-in CPU
For F60-Series/N60 and F50-Series/N50 (In Programmed Auto (P) or
Shutter-Priority Auto (S) exposure mode)
With an F60-Series/N60 or F50-Series/N50 camera in the ADVANCED mode, set
the aperture appearing in the camera's viewfinder on the SB-28's LCD panel by
pressing the SB-28's
SIMPLE mode, select the aperture from the table below and set the same
aperture on the SB-28's LCD panel.
Lighting
conditions (at ISO 100)
Aperture setting
on SB-28
For F-401x/N5005 (In Programmed Auto (P) or Shutter-Priority Auto (S)
exposure mode)
Select the aperture from the table and set the same aperture on the SB-28's
LCD panel by pressing the SB-28's
shooting distance range.
Lighting
conditions:
(at ISO 100)
Aperture setting
on SB-28
Usable shutter
speed*
*In shutter-priority auto mode, the aperture is automatically selected by the camera.
36
Mode
Flash shooting distance range
or button. With an F50-Series/N50 camera in the
Sunny day
f/8
or
Strong back-
Sunny day
lighting
f/16
1/125 sec.
Cloudy day or in
the shadows
f/5.6
button. Then confirm the flash
Cloudy day
or in the
shadows
f/8 f/5.6
Indoors
f/4
Indoors
f/5.6
1/30 sec.