Selecting a flash mode
When the µ button on the back of the SB-28 is pressed, the flash
mode indicator sequences through these modes:
Note that the LCD indications and available flash modes differ depending
on which Nikon camera and lens you are using.
The table below shows the auto flash mode recommended for use with
each camera group.
—Refer to the reference pages corresponding to your camera.
Camera group
Recommended auto flash mode
Automatic Balanced Fill-Flash with TTL Multi Sensor tØ
I
Matrix Balanced Fill-Flash tø
II
Matrix Balanced Fill-Flash t
III
Matrix Balanced Fill-Flash t
IV
Programmed TTL Auto Flash t
V
Standard TTL Flash t
VI
Non-TTL Auto Flash ˙
VII
• For available flash operations with the SB-28 and each camera group, refer to the
table on the fold-out page at the front of this manual.
22
tØ
t
tø
Q
"
˙
Reference
page
26–30
31–32
33–34
35–37
38–39
40–41
42–43