MTD GCS46 Operating Instructions Manual page 44

GB
2) Screw the spark plug manually as far as pos-
sible to avoid damaging its socket. Use the
wrench provided only to tighten it (fig.20).
3) Do not carry out repairs on the machine (if
you are not qualified to do so). Contact an au-
thorised service centre.
DANGER! In order to maintain the
original safety features, do not
make any changes to the machine.
In case of repairs, only use genuine spare
parts.
9.7 CHECKING SCREWS, FIXED PARTS AND
MOVING PARTS
# Before each use, check that there are no loose
or damaged parts or screws and that there are
no cracks or signs of wear on the cutting blades.
# Replace the damaged parts at an authorised
service centre before using the machine.
9.8 CLEANING, TRANSPORT AND STORAGE
# If the hedgecutter must be transported or is
not used for long periods of time, empty the fuel
tank.
# Do not clean with aggressive liquids.
# Store the machine in a dry and safe place
inaccessible to children.
# Before transporting or storing the chainsaw,
protect the bar/chain with the guard supplied.
44
CHAIN SAW OPERATING MANUAL
TECHNICAL DATA GCS 46
Mass
Fuel tank capacity
Chain oil tank capacity
Bar length
Chain pitch
Chain (guide thickness)
Engine sprocket wheel
Engine displacement
Engine performance (ISO 7293)
Recommended maximum engine speed 11.500 1/min
Recommended engine speed at idling 2.800 1/min
Vibrations (ISO 22867 - ISO 11681-1)
Sound pressure level
(ISO 22868 - ISO 11681-1) LpA av
Sound power level
(ISO 22868 - ISO 11681-1) LwA av
serial number n° X X X X X
5,5 Kg
360 cm
3
420 cm
3
370/440 mm
3/8"
0,05"/1.27 mm
6 teeth
46,4 cm 3
1,9 Kw
6,5 m/s
2
99 dB(A)
115 dB(A)