Table of Contents
Advertisement
LOCATION OF REINFORCEMENTS AND HIGH STRENGTH STEEL
Model S is reinforced to protect occupants in a collision. Reinforcements are shown below in green (high strength steel) and blue (extruded
aluminum).
Depending on the tools used, high strength steel can be challenging or impossible to cut. If necessary, use workaround techniques.
Extruded
High strength
aluminum
Only the side B-pillars are reinforced
with high strength steel
The side doors and roof support are
reinforced with extruded aluminum
WARNING: Always use appropriate tools (such as a hydraulic cutter), and always wear appropriate personal protective equipment (PPE) when cutting Model S. Failure to
follow these instructions can result in serious injury or death.
WARNING: Regardless of the disabling procedure you use, ALWAYS ASSUME THAT ALL HIGH VOLTAGE COMPONENTS ARE ENERGIZED! Cutting, crushing or touching
high voltage components can result in serious injury or death.
Extruded
steel
aluminum
High strength
steel
High strength
Extruded
aluminum
steel
17
Advertisement
Table of Contents
