Table of Contents
Advertisement
O P E R A T I N G C O N T R O L S
( C o n t i n u e d )
9. I M P L E M E N T L I F T LEVER - The implement lever is used to
raise or lower the implement and also to hold the implement at
any given l e v e l . The wing nut at the base can be turned in or out
to adjust the m i n i m u m operating height of an attachment.
When
transporting the attachment,
p u l l the lift
lever back u n t i l the
catch engages.
Depress the button at the top of the lever to r e -
lease and lower the attachment to desired operating height. A
slight
pulling pressure on the lever w i l l p e r m i t the release
button to be more easily depressed.
PTO LEVER - To engage the
attachment
d r i v e clutch, move
the PTO lever to the r i g h t . To
disengage, move the lever back
to
the left.
Be sure the PTO
lever is i n the off position when
parking or starting the T r a c t o r .
Figure 7a
16
Advertisement
Table of Contents
