Canceling Exposure Compensation; Cameras In Group Iii - Nikon Autofocus Speedlight SB-27 Instruction Manual

Exposure compensation for flash photography
(Cameras in Groups I thru III)

Canceling exposure compensation

Flash exposure compensation cannot be canceled by turning the
power OFF. To cancel, reset the exposure compensation amount
to 0.0 following the same steps outlined on page 61.
TTL
A
M
ZOOM
M
ISO

Cameras in Group III

Use the camera's EV compensation control function to make
exposure compensation.
—For further details, refer to the camera's Instruction Manual.
With Group III cameras, the SB-27's LCD panel does not show the
correct flash shooting distance range or the correct compensation
amount. Use the following chart as a guide for obtaining the
correct flash shooting distance range.
32 40
＋
25
For example, with ISO 100 film, if you want to compensate by +1EV
on the camera, set the ISO film speed to 50 on the SB-27's LCD
panel; if you want to compensate by –2EV, set the ISO film speed
to 400.
NOTE
With exposure compensation set on the camera, the SB-27's light
output is automatically controlled for correct background
illumination.
62
f t m
60 18
mm
30 9
15 4
7 2
4 1
2 0.6
64 80 125 160
50 100
250 320 500 640
200 400 800
1000 1250
ー
1600