Selecting A Measurement System (Meters/Feet) - Nikon Autofocus Speedlight SB-27 Instruction Manual

Selecting a measurement system
Set the flash shooting distance measurement system in the
LCD panel to either meters (m) or feet (ft).
—The system is preset to meters (m) when shipped from the factory.
TTL
A
M
ZOOM
M
ISO
Set the flash mode selector from "OFF" to "M" or "AUTO" while
holding down the "F" button and select the desired indication (m or ft).
—If you replace the batteries with the SB-27's power ON, the measurement
system returns to the default meters (m) system, even if feet (ft) had been
previously set.
16
f t m
60 18
mm
30 9
15 4
7 2
4 1
2 0.6
(meters/feet)