Cameras In Groups I And Ii; Setting Exposure Compensation On The Sb-27 - Nikon Autofocus Speedlight SB-27 Instruction Manual

(Cameras in Groups I thru III)
Setting exposure compensation for flash
The setting method varies depending on the camera.

Cameras in Groups I and II

Cameras with EV compensation control capability allow you to
compensate flash exposure on either the SB-27 or the camera (or
both.) If you use both controls, exposure is modified by the sum
total of both exposure compensation values.
For example, with a compensation of +1EV on the SB-27 and +1EV
on the camera, the background will be +1EV and the flash output
will be +2EV. Keep in mind that the SB-27's exposure compensa-
tion value indicator will not display the sum total of both
compensation values. Only the compensation value set on the
SB-27 is displayed.

Setting exposure compensation on the SB-27

TTL
A
M
ZOOM
M
ISO
1) Simultaneously press the "F" and "M" buttons .
2) Confirm the exposure compensation value indicator in the LCD
panel appears after blinking for approx. 4 sec.
3) To set the desired exposure compensation, press the "F" button
to increase the compensation value and press the "M" button to
decrease the compensation value.
4) The exposure compensation indicators ¿ and exposure
compensation value come on.
Exposure compensation is possible in 1/3 EV steps. ("–" side:
from –0.3 to –3.0 EV, and "+" side: from +0.3 to +1.0 EV) .
f t m
60 18
mm
30 9
15 4
7 2
4 1
2 0.6
61