Nikon Autofocus Speedlight SB-27 Instruction Manual page 52

Bounce flash operation
4
Set up the built-in bounce flash adapter.
Pull out the bounce flash adapter
(The bounce flash indicator
—Do not force the bounce flash adapter.
5
Confirm that the ready-light is ON, then release the
shutter to fire the flash.
TTL
A
M
ISO
If the ready-light blinks for 3 seconds after shooting, reconfirm
the flash shooting distance range or select a wider aperture,
and then reshoot.
—In bounce flash operation, no indicator bars appear in the LCD
panel. (The SB-27 no longer indicates the correct relationship
between aperture and flash shooting distance range.)
52
(Applicable to all camera groups)
2
1
appears in the LCD panel.)
f t m
60 18
30 9
15 4
7 2
4 1
2 0.6
, then raise it approx. 45° .