System Components And Wearing Seat Belt - TATA Motors Safari 2.2 VTT Dicor Owner's Manual

Table of Contents

Advertisement

Y
O
U

System Components and Wearing Seat Belt

Your 'TATA SAFARI' has three point inertia reel type front and rear seat
belts in the out board positions and a lap belt for middle passenger
on rear seat. In normal driving the belt lets you move freely in your
seat. In case of an accident or sudden braking inertia reel automatically
tightens the belt to help restrain your body.
The anchor end of the shoulder belt is adjustable to suit the height of
the passenger wearing it. The lap belt has one manually adjusted belt
that fits across the hip bone. It is similar to safety belt used in
aeroplanes.
Make sure that your seat is adjusted to a good driving position and
the back of the seat is upright.
1. Pull the tongue across your body and insert it into the buckle.
2. Check and ensure that the belt is not twisted.
3. Position the lap portion of the belt as low as possible across your
hip bone.
4. Pull up the shoulder part of the belt to remove the slack. Make
sure that the belt goes over your collar bones and across chest.
5. To unlatch the belt, press the red button on the buckle. Guide the
belt to the pillar as it retracts.
R
S
A
F
E
WEARING SEAT BELT
1
2
1. Seat Belt 2. Tongue 3. Lock Buckle 4. Lap Belt
Anchor for height adjustment
Button
Front Seat Belt Arrangement
T
Y
4
3
17

Advertisement

Table of Contents
loading

Table of Contents