Error Messages - Nikon CoolPix S620 User Manual

Error Messages

The following table lists the error messages and other warnings displayed in the
monitor, as well as the solutions for dealing with them.
Display
O
(blinks)
B
N
Battery exhausted.
P
Battery temperature high
Q
(blinks red)
P
Please wait for the
camera to finish
recording.
N
Memory card is write
protected.
P
This card cannot be used. Error accessing
P
This card cannot be read.
P
Card is not formatted.
Format card?
No
Yes
N
Out of memory.
136
Problem
Clock not set.
Battery is running low. Prepare to charge or change battery.
Battery exhausted.
Battery temperature is
high.
Camera cannot focus.
Camera cannot
perform other
operations until
recording is complete.
Write-protect switch is
in "lock" position.
memory card.
Memory card has not
been formatted for use
in this camera.
Memory card is full.
Solution
Set clock.
Charge or replace battery.
Turn off camera, and allow battery to
cool down before resuming use.
After five seconds, this message will
disappear, the monitor will turn off,
and the power-on lamp will blink
rapidly. After the lamp blinks for three
minutes, the camera will turn off
automatically, but you can also press
the power switch to turn it off
manually.
• Refocus.
• Use focus lock.
Wait until message clears from
display automatically when
recording is complete.
Slide the write-protect switch to
"write" position.
• Use an approved card.
• Check that connectors are clean.
• Confirm that memory card is
correctly inserted.
Choose Yes and press the k button
to format memory card.
• Choose smaller image mode.
• Delete pictures or sound files.
• Replace memory card.
• Remove memory card and use
internal memory.
A
114
14, 16
14, 16
17
26, 27
100
27, 68
21
130
20
20
21
90
28, 70,
74, 107
20
20