Dex COM- Manual page 125

1
10
100
For transmitters rated at a maximum output power not listed above, the
recommended separation distance d in metres (m) can be estimated
using the equation applicable to the frequency of the transmitter, where
P is the maximum output power rating of the transmitter in watts (W)
according to the transmitter manufacturer.
NOTE 1 At 80 MHz and 800 MHz, the higher frequency range applies
NOTE 2 These guidelines may not apply in all situations. Electromag-
netic propagation is affected by absorption and reflection from struc-
tures, objects and people.
This COM-DEX may be interfered with by other equipment even if that
other equipment complies with CISPR emission requirements.
1.2 1.2
3.8 3.8
12 12
122
2.3
7.3
23