Listening To The Radio - Sharp CD-BA250H Service Manual

4
4
Turn on your system
The first time the unit is plugged,
1 Press the
the unit will enter the demonstra-
X-BASS/DEMO button
tion mode. You will see words
to cancel the demon-
scroll.
stration mode.
Listening to a CD (CDs)
12 cm (5")
8 cm (3")

Listening to the radio

FM stereo mode indicator
FM stereo receiving indicator
2
Press the ON/
STAND-BY button to
turn the power on.
Press the CD button.
1
Press the OPEN/CLOSE button to
2
open the disc tray.
Place the CD(s) on the disc tray, label
3
side up.
When loading a third disc, press the
DISC SKIP button to turn the disc tray,
then place the CD in the open position.
Press the OPEN/CLOSE button to
4
close the disc tray.
To select the CD you want to listen to
5
first, press one of 1 - 3 buttons on
the remote control.
Press the button to start playback.
6
Press the TUNER (BAND) button repeat-
1
edly to select the desired frequency
band (FM or AM).
Press the TUNING/TIME (
2
ton to tune in to the desired station.
When the TUNING/TIME button is
pressed for more than 0.5 seconds, scan-
ning will start automatically and the tuner
will stop at the first receivable broadcast
station.
To receive an FM stereo transmission:
Press the TUNER (BAND) button to display the
"ST" indicator.
" " will appear when an FM broadcast is in ste-
reo.
Listening to a cassette tape (TAPE 1 or TAPE 2)
If trouble occurs
When this product is subjected to strong external interference
(mechanical shock, excessive static electricity, abnormal sup-
ply voltage due to lightning, etc.) or if it is operated incorrectly, it
may malfunction.
If such a problem occurs, do the following:
1. Set the unit to the stand-by mode and turn the power
on again.
2. If the unit is not restored in step 1, unplug and plug in
the unit, and then turn the power on.
3. If neither step 1 nor 2 restores the unit, do the follow-
ing:
Press the ON/STAND-BY button to enter the power
stand-by mode.
Whilst pressing down the
DEMO button, press the ON/STAND-BY button until
"CLEAR AL" appears.
Maintenance
Dirty heads, capstans or pinch rollers can cause poor
sound and tape jams. Clean these parts with a cotton swab
moistened with commercial head/pinch roller cleaner or
isopropyl alcohol.
When cleaning the heads, pinch rollers, etc., unplug the
unit which contains high voltages.
After long use, the deck's heads and capstans may be-
or ) but-
come magnetised, causing poor sound. Demagenetise
these parts once every 30 hours of playing/recording time
by using a commercial tape head demagnetiser. Read the
demagnetiser's instructions carefully before use.
Clean the dust or stain on the CD pickup lens using a com-
mercial cleaning disc (brush type).
Open the cassette door by pushing the
1
area marked "
Load a cassette into the TAPE 1 or TAPE
2
2 cassette compartment with the side to
be played facing toward you.
Press the TAPE (1
3
the cassette you want to listen to.
Press the
4
TAPE 1 TAPE 2
button and the X-BASS/
TAPE 1
TAPE 2
PUSH EJECT".
2) button to select
button to start playback.
A Playback head
B Capstan
C Pinch roller
D Erase head
E Recording/Playback head
B
A C
E B C
D