Check Points; Manual Focus - Nikon COOLPIX995 User Manual

Nikon COOLPIX995 Digital Camera
The Green LED lights when a subject is in focus, and focus and exposure are locked.
Do not change the distance to the subject after the focus is locked.

Check points

The purpose of Auto exposure lock is to fix the exposure precisely on the subject. The Center-Weighted or Spot
Metering modes are most suited for this purpose. For setting metering, see
When shooting with the Autofocus lock, we recommend manually
mode).

Manual Focus

Shooting Mode
When the MODE dial is set to
convenient to ensure accurate focus when the shooting distance is known or in
expected.
To select Manual Focus rotate the
appears in the Control panel as confirmation. Keeping the
again to display the shooting distance both on the Control panel and Monitor.
The shooting distance can be set in 49 steps from 0.02 m (0.06 ft.) to 10 m (30 ft.), plus infinity.
To confirm the chosen shooting distance in the Control panel, lightly press the
To Cancel Manual Focus mode
Manual Focus mode is canceled by pressing the
Focus mode then returns to the last mode before Manual focus was set.
NOTE:
Manual Focus
http://www.livemanuals.com/packages/products/NK002/2136/manual/fullmanual.html
, the camera-to-subject distance can be set manually by using Manual focus. This is
COMMAND dial while pressing the
FOCUS MODE
FOCUS MODE button. The
Metering .
setting the focus target area to the center (in
situations where Autofocus may not work as
FOCUS MODE button. M-FOCUS
button pressed, rotate the
SHUTTER RELEASE
Page 61 of 136
indication
COMMAND dial
button.
3/15/2002