Setting The Flash Mode - Nikon COOLPIX995 User Manual

Nikon COOLPIX995 Digital Camera
Long time (BULB) exposure (up to 60 sec.)
1. Set the Exposure mode to M, and place the camera on a tripod or secure position, then rotate the
dial to set the shutter speed indication to bu 1b (next after 8 sec.) to enable long time ( BULB ) exposure.
2. Pressing the
SHUTTER RELEASE
BULB can only be set when Single mode is selected in the
The Speedlight is canceled if BULB exposure is set.
During long-time exposure, selecting
spaced bright-colored pixels in the recorded image.

Setting the Flash Mode

Shooting Mode
Four Flash modes are available for use in various flash shooting situations.
Condition in which Flash mode can be set
Flash mode can only be set when the built-in Speedlight is raised. The Flash Cancel indication
panel and Monitor when the built-in Speedlight is stowed.
1. 1. Slide the Speedlight release lever to release the built-in Speedlight.
NOTE:
If flash does not fire
The Speedlight does not fire with Infinity focus, in
Selector mode, Lens mode
2.
Press the FLASH MODE
http://www.livemanuals.com/packages/products/NK002/2136/manual/fullmanual.html
button once opens the shutter up to 60 sec.
Noise Reduction
Continuous
or Int Flash Off mode even when the built-in Speedlight is released.
button repeatedly until the desired Flash mode appears.
Continuous Shooting menu.
On can reduce noise in the form randomly
Shooting mode (other than Single mode), in
Page 53 of 136
COMMAND
displayed in the Control
Best Shot
3/15/2002