Digital Zoom - Nikon COOLPIX995 User Manual

Nikon COOLPIX995 Digital Camera
Self-timer
Controls
In mode, the selected Focus mode can be set to remain in memory even when the power is turned off; this setting
can be changed with the Memorize setting.
Check points
The Autofocus mode is selected when the power is turned on.
Selecting the Self-timer enables Macro Close-up mode and
Autofocus options
There are several advanced options that may be employed when setting up the Autofocus . In particular, a difference will be
noticed when the Monitor is on or off in Autofocus or Macro Close-up mode.
Monitor
On*1 Continuous AF
Off
* In mode, the autofocus system when the Monitor is on can be changed to (Single AF) in the
Focus Mode sub-menu in Shooting menu.
Autofocus target area selection
Autofocus target area varies according to Shooting mode.
Shooting mode
Focus is targeted on the center AF area. Place the main subject in the center
AF area.
All five AF areas in the Monitor are used when focusing. Normally, AUTO mode,
where the camera automatically focuses using all five AF areas, is activated. In
MANUAL mode, you can select just one of the AF areas, and when Autofocus is
Off, only the center

Digital Zoom

With the Monitor turned on, Digital zoom electronically magnifies the center of the picture so that it fills the entire image. The
subject can be magnified by up to 4X.
Keep pressing the T Zoom button for more than 2 sec. after the Zoom has reached the highest telephoto position. The
Digital zoom function activates automatically and the image in the Monitor is zoomed by up to 4.0X. The Digital zoom
http://www.livemanuals.com/packages/products/NK002/2136/manual/fullmanual.html
once or 3 sec. after pressing the button twice. The Self-timer lamp
pulses until 1 sec. before
V lamp lights steadily for the final 1 sec. The remaining time is
visible as a count-down on the Monitor.
To cancel the Self-timer after initiation, pause the timer and
then press the
or turn the power off.
AF mode
Autofocus operation is activated continuously regardless of the
operation of the
on when the
Lock , ) and the Green LED lights as confirmation of successful
focus.
Single AF Autofocus operation is activated only when the
RELEASE button is lightly pressed. Once focus is achieved, the
Green LED lights and
RELEASE button is kept lightly pressed. Battery power can be
conserved since the Monitor is not always on.
Characteristics
AF area is activated.
SHUTTER RELEASE
button so
FOCUS MODE
is also displayed.
Characteristics
button. The focus is locked
SHUTTER RELEASE
SHUTTER RELEASE button is lightly pressed (
focus is locked as long as the
Page 48 of 136
and the Self-timer
disappears,
Focus
SHUTTER
SHUTTER
Focus Options > Auto-
3/15/2002