Table of Contents
Advertisement
Available languages
Available languages
• pull by plug.rather than cord when disconnecting
charger. This will reduce risk of
damage to electric plug and cord.
• Make sure that cord is located so that it will not be stepped
on, tripped over, or
otherwise
subjected
to damage or stress.
• Do not use an extension
cord unless it is absolutely
necessary. Use of improper
extension cord could result in risk of fire, electric shock, or electrocution.
• An extension
cord must have adequate wir e size (AWG or Ame.rican Wire Gauge )
for safety. The smafler the gauge number of the wire, the .qreater the capacitv ot the
cable, that is 16 gauge has more capacity than 18 gauge.q/t/hen using more fhan one
extension to make up, the total length, be sure each incfividual extension contains at
least the minimum wire size.
• Do not operate charger with damaged cord or plug -- have them replaced
immediately.
• Do not operate charger
if it has received a sharp blow, been dropped,
or otherwise
damagedin
any way. Take it to an authorized service center.
• Do not disassemble
charger;
take it to an authorized service center when service
or repair is required. Incorrect reassembly may result in a risk of electric shock,
electrocution
or fire.
• Disconnect
the charger from the outlet before attempting
any cleaning.
This will
reduce the risk of electric shock. Removing the battery pac_will-not
reduce this risk.
• NEVER attempt to connect 2 chargers
together.
• The charger is designed to operate on standard household electrical power
(120 Volts). Do not attempt to use it on any other voltage.
SAVE THESE
iNSTRUCTiONS
FUNCTIONAL
DESCRIPTION
1. Variable speed switch
2. Forward/reverse
button
3. Torque adjustment collar
4. Keytess chuck
5. Dual range gearing
6. LED work bight
7. Battery
8. Battery release button
9. Charger
10. Screwdriver bit holder
Advertisement
Table of Contents
