Nikon Coolpix S640 User Manual page 161

Problem
Camera settings reset.
Monitor turns off, and
the power-on lamp
blinks rapidly.
Battery inserted into
the camera is not
charged when the
camera is connected
to a computer.
Cause/Solution
Backup battery is exhausted; all settings were restored
to their default values.
Battery temperature is high. Turn off camera, and allow
battery to cool down before resuming use. After the
lamp blinks for three minutes, the camera will turn off
automatically, but you can also press the power switch
to turn it off manually.
• The battery is not charged when the camera is turned
off.
• Charging stops if the computer enters sleep mode
while the battery is charging. The camera may be
turned off.
• Depending upon computer specifications, settings,
and power supply and allocation, it may be
impossible to charge the battery inserted into the
camera via computer connection.
Troubleshooting
A
121
19
84
149