Nikon COOLPIX S6 User Manual page 80

Connecting to the Network
After creating a network profi le, you can connect to the network by selecting the
profi le from a list. Turn the camera on, select shooting mode, and follow the steps
below:
1
Display shooting mode menu.
3
Display profi le list.
* To view settings for the selected profi le, press the zoom control to T ( ). If you are unable
to connect, check these settings to make sure they match those used on the network. If
the last session with the selected device did not terminate normally, the camera will briefl y
display a message stating that the session is now complete.
5
† To select another profi le, repeat Steps 1–5.
Auto Power Off
While the camera is in
monitor turns off to save power (auto power off ;
70
CHOOSE PROFILE 1/2
Profile-A
Profile-B
Profile-C
Confirm Info
WIRELESS MENU 1/2
Easy Transfer (PM)
Easy Trans. (no PM)
Shooting Date
Selected Images
Shoot & Transfer
Confirm Help
(wireless) mode, data transmission will continue after the camera
2
Highlight
4
Highlight profi le.
†
Select profi le. If network profi le is selected,
wireless transfer menu shown at left will be
displayed when connection is established.
If printer profi le is selected, wireless printer
menu will be displayed (
88).
.
CHOOSE PROFILE 1/2
Profile-A
Profile-B
Profile-C
Confirm Info
*
73).