Table of Contents
Advertisement
2
Choose an Interface > USB option as described in "Choosing a USB Option
for Connection to a Computer" (
3
Connect COOL-STATION to the computer using
the supplied USB cable.
4
Place the camera in the COOL-STATION and turn it
on.
5
Press the
(
tures to the computer. The following messages
will be displayed:
* Note that the
button can not be used to transfer pictures if the memory card is locked
(
13) or if Mass Storage is selected for USB and no memory card is inserted. Transfer
pictures using the PictureProject Transfer button (see below). Pictmotion movies can be
transferred in PictureProject (
6
The pictures will be displayed in PictureProject when transfer is complete.
Disconnect the camera as described in "Disconnecting the Camera" (
Marking Pictures for Transfer
Pictures marked for transfer are shown by a
playback. By default, all pictures are automatically marked
for transfer. Two options control transfer marking:
• Interface > Auto transfer (setup menu): Choose On to
mark all new pictures for transfer (
• Transfer marking (playback menu): Change marking for existing pictures (
The PictureProject Transfer Button
To copy both marked and unmarked pictures to the com-
puter, click the PictureProject Transfer button instead of
pressing the
button in Step 5. See the Quick Start Guide
or PictureProject reference manual (on CD) for details.
*
) button
to copy all marked pic-
52).
89).
56) and then turn the camera off .
icon during
56).
81).
55
Hide quick links:
Advertisement
Table of Contents
