Selling Points - Hitachi C 12LSH Technical Data And Service Manual

4. SELLING POINTS

(1) Compact body thanks to
the new sliding system
Operable even in tight places because
the depth of the main unit is 930 mm.
(13)
Right and left bevel cutting
To left: H70 mm x W312 mm
(H2-3/4" x W12-1/4")
H75 mm x W260 mm
(H2-15/16" x W10-3/16")
To right: H45 mm x W312 mm
(H1-3/4" x W12-1/4")
H50 mm x W260 mm
(H1-15/16" x W10-3/16")
(15)
Powerful 15 amps motor
(8)
High dust collecting
performance
(7) Conveniently
positioned bevel
angle locking
mechanism
(10)
Slide cutting
H107 mm x W312 mm
(H4-3/16" X W12-1/4")
H120 mm x W260 mm
(H4-11/16" X W10-3/16")
(4)
Bevel angle fine
adjustment
(3)
Laser marker
For easier alignment
with the ink line
(5)
High sub fence
(Right and left)
120 mm (4-11/16") in height
NOTE: Numerals in ( ) are identical with item numbers in "4-1. Selling Point Descriptions".
(14)
(9)
Positive angle stoppers
For easy adjustment of the turn table position for miter cutting
(At the right and left of the 0˚ center setting,
at 15˚, 22.5˚, 31.6˚ and 45˚settings)
--- 2 ---
Compound (miter + bevel) cutting
To left: H70 mm x W220 mm (H2-3/4" x W8-5/8")
H75 mm x W180 mm (H2-15/16" x W7-1/16")
To right: H45 mm x W220 mm (H1-3/4" x W8-5/8")
H50 mm x W180 mm (H1-15/16" x W7-1/16")
(2)
Digital display panel that
indicates miter/bevel angles
(Only the Model C 12LSH)
(4) Miter angle fine adjustment
(12)
(6) Aggressive tool design
(11)
Press cutting
H107 mm x W107 mm
(H4-3/16" x W4-3/16")
Miter cutting
[ Left 45˚, right 57˚]