Troubleshooting - Primus PRI5500 User Manual And Product Specifications

Troubleshooting

Issue
Bag does not vacuum
Air still inside bag
Appliance does not seal after vacuuming
Vacuum is released
The following spare parts are available:
CANISTERS, HOSE ATTACHMENTS AND ROLLS SOLD SEPARATELY.
www.primusaustralia.com.au
Vacuum Sealing System
Possible Solutions
Check power cord is fi rmly plugged into power outlet
and outlet is switched on
Check power cord for any damage
Make sure bag is inserted correctly
Check there is no damage to bag or lower gasket
Make sure bag has no leaks
Check sealing strip and gaskets for any damage
Check gaskets and sealing strips for any damage
Wipe clean and retry
Check bag for any leaks
This may depend on contents of bag
Some foods (such as garlic or onions) release gas which
may expand the bag
Check bag is free of holes - try a new bag
• Lower gasket and sealing strip set
(contains 1 x lower gasket and 1 x sealing strip)
Part No. 504333-01S
• Cutter rack
Part No. PRI5500-01S
• Rolls
30cm x 10m (2 x 5m)
Part No. PRI5500R10
(sold separately)