Assembly Instructions - Fein FSC500QSL Instruction Manual

OBJ_BUCH-0000000238-001.book Page 12 Tuesday, January 26, 2016 7:56 AM
en
12

Assembly instructions.

Before mounting or replacing cutting tool or accessories, pull the power plug.
WARNING
This preventive safety measure rules out the danger of injuries through acci-
dental starting of the power tool.
Mounting the bow handle
(For repairing tile/grouting joints)
(figure 2).
Loosen locking screw of the bow handle.
Mount the bow handle onto the gear case.
Tighten the locking screw of the bow handle
again.
Mounting the depth stop (figure 3).
Mount the depth stop with the 2 screws to
the bottom side of the gear case.
Fig. 2 Locking screw
3.
1.
2.
Bow handle
Fig. 3
Depth stop
1.
2.
Screws