Brewing Coffee - Philips HD7567 User Manual

General description (Fig. 1)
1 Filter holder
2 Detachable front cover
3 Water tank lid
4 Water tank
5 Coffeemaker
6 Mains cord
7 On/off rocker switch with power-on light (HD7564/HD7563/HD7562)
8 Buffer ring (HD7567/HD7562)
9 Jug
10 Jug lid with mixing pipe
11 On/off button with power-on light ring (HD7566/HD7565)
12 Display with timer and on/off button with power-on light (HD7567)
Preparing for use
1 Put the appliance on a flat and stable surface.
2 Put the plug in an earthed wall socket.
3 To store excess cord, push it into the opening at the back of the coffeemaker (Fig. 2).
Setting the clock (HD7567 only)
1 After you have put the plug in the wall socket, the word 'SET' appears on the display (Fig. 3).
2 Press the 'H' button one or more times to set the hour (Fig. 4).
The display shows the set hour (e.g. 7:00).
,
3 Press the 'M' button one or more times to set the minutes (Fig. 5).
The display shows the set minutes (e.g. 7:20).
,
Using the appliance

Brewing coffee

1 Make sure the plug is in the wall socket.
2 Fill the water tank with fresh, cold water (Fig. 6).
- The graduations on the left are for large cups (120ml).
- The graduations on the right are for small cups (80ml).
3 Open the filter holder (Fig. 7).
4 Take a paper filter (type 1x4 or no. 4) and fold the sealed edges to prevent tearing and
folding (Fig. 8).
5 Put the filter in the filter holder (Fig. 9).
Note: Some versions come with a permanent filter. In this case you do not need to use paper filters.
6 Put ground coffee (filter-fine grind) in the filter (Fig. 10).
- For large cups: use one heaped measuring spoon of ground coffee for each cup.
- For small cups: use one level measuring spoon of ground coffee for each cup.
7 Close the filter holder. (Fig. 11)
8 Place the jug on the hotplate (Fig. 12).
ENGLISH
7